VACUUM AND DISCHARGE HOSE – MEDIUM DUTY

A Vacuum and Discharge Hose for Medium Duty Suction made from PVC Compounds

Pressures and Temperatures: Temperature Range -10°C to +60°C
Values given are based on the short term burst pressure of the hose at 20°C based on a 3:1 safety factor. Any increase in temperature above 20°C will result in a decline in the working pressure values
Cold Bend: -45°C
Vacuum: 680MM Hg = 90% at 20°C - approximately 15% lighter that Heavy Duty Suction Hose

Applications: This hose can be used for general pumping and suction applications in agriculture, industry and construction. It can also be used for the conveyance of water, sludge, slurry, chemicals and other waste matter.

Chemical Resistance: Resistant to most oxidising and reducing agents and diluted acids and alkalis.

Diameter Variation: +/- 10%

Colour: Olive Green

10 Metre Coils

Product Code	Internal Diameter mm	Wall Thickness mm	Pressure Bar	Bend Radius mm	Weight kg/roll
BBN 10.025	25	3.8	7	125	-
BBN 10.032	32	4.0	7	160	-
BBN 10.038	38	4.4	6	190	-
BBN 10.050	50	4.8	5	250	-
BBN 10.063	63	5.2	4.5	315	13.40
BBN 10.075	75	5.2	5	300	-
BBN 10.090	90	5.5	4	375	20.0

30 Metre Coils

Product Code	Internal Diameter mm	Wall Thickness mm	Pressure Bar	Bend Radius mm	Weight kg/roll
BBN 30.019	19	3.6	7	100	8.3
BBN 30.025	25	3.8	7	125	12.0
BBN 30.032	32	4.0	7	160	14.0
BBN 30.038	38	4.4	6	190	21.5
BBN 30.050	50	4.8	5	250	30.0
BBN 30.063	63	5.2	4.5	315	40.0
BBN 30.075	75	5.2	5	300	48.3
BBN 30.090	90	5.5	4	375	60.0
BBN 30.100	100	6.3	4	400	81.0
BBN 30.150	150	7.5	3	800	153.3